|
|
Electronic Equipment & Components
|
Suppliers Directory
|
KUSAM ELECTRICAL INDUSTRIES LTD
| | Address : |
PO BOX 6390 T J ROAD SEWREE |
| Telephone : |
22-4149657 |
| Fax : |
22-4130747 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
DIGITAL MULTIMETERS - (MODEL 207-MK-1), THESE MULTIMETERS MEASURE AC VOLTAGE FROM 0.1 MV TO 750V, AC CURRENT FROM 0.1 MA TO 10 A, DC VOLTAGE FROM 0.1 MV TO 1000 V, DC CURRENT FROM 0.1 MA TO 10A, RESISTANCE FROM 0.1 W TO 40 MW, HZ FREQUENCY FROM 0.001 HZ TO 9.999 MHZ, CAPACITANCE FROM 0.001 NF TO 200 MF, CONTINUITY AND DUTY CYCLE. THE INSTRUMENTS MEET IEC-1010 OVERLOAD CATEGORY II AND POLLUTION DEGREE; AND HAVE TRANSISTOR HFE TEST FUNCTIONS. THEY ALSO HAVE AUTO POWER-OFF FUNCTION, IE, IN 15 MINUTES AFTER STOPPING THE SWITCH OR NOT PUSHING ANY KEY, THE METERS AUTOMATICALLY ENTER TO POWER-OFF MODE. IN OVER-RANGE 'OL' IS DISPLAYED. DIMENSIONS ARE 141 (H) * 72 MM (W) * 36 MM (D); AND WEIGHT APPROXIMATELY 170 GMS (INCLUDING BATTERIES). FUSES ARE FAST BLOW 0.8 A/250 V, 10A/250V.
|
|
DIGITAL POWER METER - KUSAM-MECO PRESENTS A DIGITAL POWER METER HAVING 12 DISPLAYS THAT CAN MEASURE VOLTAGE IN 3 PHASES (BOTH P-P AND P-N), CURRENT IN 3 PHASES, ACTIVE POWER, POWER FACTOR, REACTIVE POWER, ENERGY, REACTIVE ENERGY, GROUND LEAKAGE, AND MAXIMUM DEMAND WITH A FACILITY FOR SETTING HIGH AND LOW LIMITS FOR VOLTAGE, PF, KW, HZ, KVA, KVAR AND GROUND LEAKAGE. THE DPM ALSO COMES WITH A FACILITY FOR DELAY TIMER SETTING FROM 0 TO 999 SECS AND HAS PROVISION FOR SETTING HIGH AND LOW LIMITS FOR MAXIMUM DEMAND IN KVA IN 4 STEPS. THE DPM HAS ANALOGUE OUTPUT OF 4-20 MA OR 1-5 V FOR ACTIVE POWER FOR CONNECTING TO A RECORDER/CONTROLLER AND HAS A BUILT-IN RS:232 INTERFACE FOR DOWNLOADING DATA TO A PC. LOAD MANAGER SOFTWARE IS AVAILABLE FOR ANALYSING VARIOUS PARAMETERS WITH OPTIONAL CLAMPS FOR CARRYING ON-SITE TESTING FOR ENERGY AUDITS AND IS IDEAL FOR ENERGY AUDITING.
|
|
LCR METER - MODEL 954 M - MUMBAI-BASED KUSAM ELECTRICAL INDUSTRIES OFFERS A NEW, IMPROVED 3 1/2-DIGIT 2000 COUNTS DIGITAL LCR METER - MODEL 954 MK-1.LCR METER HAS AN ATTRACTIVE ABS UNBREAKABLE GREEN COLOUR CASE WITH TILT STAND FOR TABLE USE, THAT CAN MEASURE CAPACITANCE IN 9 RANGES, I E, 200 PF, 2 NF, 20 NF, 200 NF, 2 MU F, 20 MU F, 200 MU F, 1,000 MU F AND 2,000 MU F WITH OVERLOAD PROTECTION OF 0.1 A/250 V. ALSO IT CAN MEASURE RESISTANCE IN 4 RANGES, I E, 20 OHM, 200 OHM, 2 K OHM, 20 M OHM WITH OVERLOAD PROTECTION OF 250 V; AND INDUCTANCE IN 4 RANGES, I E, 20 MU H, 200 MH, 2 H AND 200 H WITH OVERLOAD PROTECTION OF 0.1A / 250V AND ITS METER WITH LED AND MICROWAVE DIODE HAS DATA HOLD FACILITY AND ALSO HAS THE FACILITY FOR ZENER DIODE TEST AND IS SUPPLIED WITH TEST LEADS, CARRYING CASE AND INSTRUCTION MANUAL WITH APPLICATIONS IN MANY ENGINEERING COLLEGES AND INDUSTRIES.
|
|
RESISTANCE TESTER - KUSAM-MECO HAS INTRODUCED INSULATION RESISTANCE TESTERS THAT ARE LIGHTWEIGHT, HANDY AND HAVE A PROVISION FOR MEASURING AC VOLTAGE AND ALSO INDICATE THE BATTERY CONDITION. A 30 MM ANTI PARALLAX MIRROR SCALE ENSURES ACCURATE READINGS WITH A OUTPUT VOLTAGE WITHIN +/- 85 PERCENT OF THE RATED VOLTAGE AT CENTER SCALE. THE TESTERS ARE AVAILABLE IN 2 VOLTAGE RATINGS OF 500 AND 1000 V AND 3 RESISTANCE RANGES OF 100, 1,000 AND 2,000 M OHM AND COME HOUSED IN AN ELEGANT INSULATED ABS CASE WITH CLEAR ACRYLIC WINDOW AND COMPLETE INSTRUCTION MANUAL, TEST LEAD AND CARRYING CASE.
|
|
DIGITAL CLAMP-METER - MODEL 9 - THIS NEW DIGITAL CLAMP-METER, MODEL 999 CAN MEASURE AC CURRENT IN 3 RANGES: 0-20, 200, 1,000 AMPS, AC VOLTAGE IN 2 RANGES: 0-200, 750 VOLTS, DC VOLTAGE UP TO 1,000 V, RESISTANCE 2 KOHMS, 200 KOHMS AND FREQUENCY UP TO 2 KHZ, 20 KHZ WITH AUTORANGING FEATURE AND ALSO HAS DIODE TEST AND CONTINUITY CHECKING FACILITY AND DATA HOLD FUNCTION. THE CLAMP METER CAN TAKE CONDUCTORS UP TO 55 MM DIAMETER, WHILE MODEL 999 IS VERY RUGGED AND ALSO HAS CE APPROVAL.
|
|
DIGITAL MULTIMETER - THE NEW 3-1/2 DIGIT 2000 COUNT DIGITAL MULTIMETER COMES FROM KUSAM MECO. IT HAS 8 FUNCTIONS AND 19 MEASURING RANGES AND INCLUDES NEW FEATURES LIKE: PROTECTIVE HOLSTER, 10 A FUSED AND BUZZER ALARM ON MIS-CONNECTION, WITH A BATTERY TEST AND CAN MEASURE VOLTAGE UP TO 600 V AC AND DC, CURRENT FROM 2 MA DC TO L 0 A DC, RESISTANCE 200 W TO 20 MW. ALSO A TRANSISTOR, DIODE AND CONTINUITY TESTS ARE AVAILABLE. IT HAS OVERLOAD PROTECTION @ 500 V AC/DC IN RESISTANCE RANGE AND CONFORMS TO IEC-1010 OVERLOAD CATEGORY II AND IS SPECIALLY DESIGNED TEST LEADS OFFER COMPLETE SAFETY DURING CONNECTIONS.
|
|
DIGITAL MULTIMETERS - MODEL 2 - THE DIGITAL MULTIMETERS FROM KUSAM ELECTRICAL INDUSTRIES LTD ARE AVILABLE IN MODEL 207, A NEW 3-3/4-DIGIT 4000-COUNT DIGITAL MULTIMETER WHICH FEATURES: AUTO RANGE, AUTO POWER OFF, AND PROTECTIVE HOLSTER AND CAN MEASURE VOLTAGE UP TO 600 V AC AND DC, CURRENT FROM 0.1 MA TO 10 A AC/DC AND RESISTANCE 0. 1W UP TO 40 MW. DIODE AND CONTINUITY TEST ARE AVAILABLE. IT HAS OVERLOAD PROTECTION AT 500 V AC/DC IN RESISTANCE RANGE, WHILE MODEL2O7CONFORMSTOLEC-1010OVERLOAD CATEGORY II.
|
|
LCR METER - IPF7 - KUSAM ELECTRICAL INDUSTRIES OFFERS A NEW, IMPROVED 3 1/2-DIGIT 2000 COUNTS DIGITAL LCR METER - MODEL 954 MK-1.LCR METER HAVING AN ATTRACTIVE ABS UNBREAKABLE GREEN COLOUR CASE WITH TILT STAND FOR TABLE USE. IT CAN MEASURE CAPACITANCE IN 9 RANGES, I E, 200 PF, 2 NF, 20 NF, 200 NF, 2 MU F, 20 MU F, 200 MU F, 1,000 MU F AND 2,000 MU F WITH OVERLOAD PROTECTION OF 0.1 A/250 V CAN ALSO MEASURE RESISTANCE IN 4 RANGES, I E, 20 OHM, 200 OHM, 2 K OHM, 20 M OHM WITH OVERLOAD PROTECTION OF 250 V; AND INDUCTANCE IN 4 RANGES, I E, 20 MU H, 200 MH, 2 H AND 200 H WITH OVERLOAD PROTECTION OF 0.1A / 250V. THIS METER WITH LED AND MICROWAVE DIODE HAS DATA HOLD FACILITY AND ALSO HAS THE FACILITY FOR ZENER DIODE TEST AND IS SUPPLIED WITH TEST LEADS, CARRYING CASE AND INSTRUCTION MANUAL AND FINDS APPLICATIONS IN MANY ENGINEERING COLLEGES AND INDUSTRIES.
|
|
CLAMP METER, DIGITAL - MODEL 27 - PRESENTING A 3-1/2 DIGIT, 2000 COUNT DIGITAL CLAMP METER, MODEL 2700 WITH 6 FUNCTIONS AND 12 MEASUREMENTS THAT CAN MEASURE AC CURRENT IN 3 RANGES, IE, 20 A, 200 A AND 300 A; AC VOLTAGE IN 2 RANGES, IE, 200 V AND 750 V; DC VOLTAGE IN 3 RANGES, IE, 2 V, 200 V AND 1000 V; RESISTANCE IN 2 RANGES, IE, 200 W AND 200 KW; AND DIODE TEST AND CONTINUITY TEST. IT ALSO HAS DATA HOLD FACILITY THAT CAN CARRY CONDUCTOR UP TO 300MM DIA. AND IS SUPPLIED COMPLETELY WITH TEST LEADS, CARRYING CAST AND INSTRUCTION MANUAL AND IS USEFUL IN VARIOUS ENGINEERING COLLEGES, MANY INDUSTRIES, REFRIGERATOR AND AC SERVICING, MOTOR TESTING, ETC.
|
|
POWER METER, DIGITAL - THIS DIGITAL POWER METER HAVING 12 DISPLAYS CAN MEASURE VOLTAGE IN 3 PHASES (BOTH P-P AND P-N), CURRENT IN 3 PHASES, ACTIVE POWER, POWER FACTOR, REACTIVE POWER, ENERGY, REACTIVE ENERGY, GROUND LEAKAGE, MAXIMUM DEMAND, ETC WITH FACILITY FOR SETTING HIGH AND LOW LIMITS FOR VOLTAGE, PF, KW, HZ, KVA, KVAR AND GROUND LEAKAGE. ITS FEATURES INCLUDE FACILITY FOR DELAY TIMER SETTING FROM 0-999 SECS; PROVISION FOR SETTING HIGH AND LOW LIMITS FOR MAXIMUM DEMAND IN KVA IN 4 STEPS; ANALOGUE OUTPUT 4-20 MA OR 1-5 V FOR ACTIVE POWER FOR CONNECTING TO A RECORDER/CONTROLLER; BUILT-IN RS-232 INTERFACE FOR DOWN LOADING DATA TO A PC; LOAD MANAGER SOFTWARE FOR ANALYZING THE VARIOUS PARAMETERS; AND OPTIONAL CLAMPS FOR CARRYING ON SITE TESTING FOR ENERGY AUDITS AND IS IDEAL FOR ENERGY AUDITING.
|
|
INSULATION RESISTANCE TESTER, ANALOGUE - KUSAM-MECO PRESENTS A STATE-OF-THE-ART INSULATION RESISTANCE TESTERS THAT ARE LIGHTWEIGHT, HANDY AND HAVE A PROVISION FOR MEASURING AC VOLTAGE AND ALSO INDICATE THE BATTERY CONDITION. A 30 MM ANTI PARALLAX MIRROR SCALE ENSURES ACCURATE READINGS WITH A OUTPUT VOLTAGE WITHIN ( 85% OF THE RATED VOLTAGE AT CENTER SCALE AND ARE AVAILABLE IN 2 VOLTAGE RATINGS OF 500 V AND 1000 V. THE INSTRUMENT IS HOUSED IN AN ELEGANT INSULATED ABS CASE WITH CLEAR ACRYLIC WINDOW, ACCOMPANIED WITH COMPLETE INSTRUCTION MANUAL, TEST LEAD AND CARRYING CASE.
|
|
HYGRO THERMOGRAPH RECORD - KUSAM ELECTRICAL INDUSTRIES PRESENTS SEKONIC HYGRO THERMOGRAPH RECORDER, WHICH RECORDS BOTH TEMPERATURE AND HUMIDITY SIMULTANEOUSLY WITHOUT ANY DISTURBANCE FOR A LONG PERIOD WITH LCD DIGITAL DISPLAY THAT OFFERS INSTANTANEOUS READINGS OF TEMPERATURE AND HUMIDITY WHILE THE CHART GIVES RECORD FOR BOTH TEMPERATURE AND HUMIDITY FOR A LONG PERIOD. THE DEVICE HAS PROVISION FOR TWO SET POINTS 'HIGH LIMIT' AND 'LOW LIMIT' FOR TEMPERATURE AND HUMIDITY AND WHEN HUMIDITY IS SET AT 55% RH AND IT CROSSES THE MAXIMUM LIMIT OF 60% RH OR IT FALLS BELOW 55% RH, THEN AUTOMATICALLY THE RELAYS WILL ACTUATE THE CONNECTED DEVICE (EG, BLOWER/AIR CONDITIONER/BOILER, ETC) TO CONTROL THE HUMIDITY. SIMILARLY HIGH AND LOW LIMITS FOR TEMPERATURE CAN BE SET AT TWO DIFFERENT POINTS AND THE RELAYS WILL ACTUATE THE CONNECTED DEVICE (EG, HEATERS/AIR CONDITIONER/BLOWER, ETC) TO CONTROL THE TEMPERATURE.
|
|
DIGITAL MULTIMETER - KUSAM-MECO PRESENTS A NEW 5000 COUNTS DIGITAL MULTIMETER, MODEL-5040, WITH RS 232C SOFTWARE INTERFACE, A PROFESSIONAL GRADE RUGGED MULTIMETER HAVING 3-5/6 DIGITS WITH LCD DISPLAY THAT CAN MEASURE AC VOLTAGE FROM 0.01MV TO 1000V, DC VOLTAGE FROM 0.01MV TO 1000V, AC CURRENT FROM 0.1µA TO 10 µA, DC CURRENT FROM 0.1µA TO 10µA, RESISTANCE FROM 0.01O TO 50MO, CAPACITANCE FROM 0.01NF TO 9999MF, FREQUENCY FROM 0.001HZ TO 125KHZ, AND CONTINUITY AND DIODE TEST. ITS SPECIAL FEATURE THAT IT HAS A RS232CPC INTERFACE CAPABILITY AND IS PROVIDED WITH RS232C OPTICAL ADAPTER CABLE AND SOFTWARE FLOPPIES THAT ENABLES IT TO READ AND RECORD THE DATA IN A COMPUTER COMBINED WITH OTHER FEATURES LIKE BACKLIT LARGE LCD DISPLAY AND DATA HOLD FUNCTIONS; AUTO POWER OFF FUNCTION; ANALOGUE 52 SEGMENT BAR GRAPH DISPLAY; FULLY AUTO-RANGING FEATURE; FIRE RETARDED CASE WITH SPLASH PROOF CONSTRUCTION; AND FAST MEASUREMENT OF 5 TIMES/SEC AND IS PROVIDED WITH 600 V INPUT PROTECTION AND TRANSIENT PROTECTION UP TO 6.5 KV/1.2/50µS LIGHT SURGE.
|
|
DUAL DISPLAY CLAMP-ON METER - PRESENTING A NEW DUAL DISPLAY CLAMP-ON MULTIMETER (MODEL-2799) BEING INTRODUCED FOR THE FIRST TIME IN INDIA BY KUSAM-MECO. THIS IS AN INDUSTRIAL GRADE DIGITAL CLAMP METER HAVING TWO 3-3/4 DIGITS 4000 COUNTS LCD DISPLAYS AND CAN MEASURE: AC VOLTAGE FROM 0.1MV TO 600V, AC CURRENT FROM 0.1µA TO 2000µA (VIA TEST LEADS) AND FROM 0.01A TO 400A (CLAMP-ON); DC VOLTAGE FROM 0.1 MV TO 600V, DC CURRENT FROM 0.1µA TO 2000µA (VIA TEST LEADS); RESISTANCE FROM 0.1 TO 40 M; FREQUENCY FROM 0.001HZ TO 100KHZ; AND CAPACITANCE FROM 0.1µF TO 3000µF. THE METER COMES WITH A DIODE TEST, FAST AUDIBLE CONTINUITY FUNCTION THAT IS USEFUL FOR ACA 0.01A TO 400A NON-INVASIVE CURRENT MEASUREMENT AND HAS A SPECIAL FEATURE OF AUTO POWER OFF. IT ALSO HAS DATA HOLD AND MAX DISPLAY FUNCTION WITH 0.1µA RESOLUTION (VIA TEST LEADS) FOR FLAME SENSORS ENABLING IT TO MEASURE CURRENT+VOLTAGE OR CURRENT+OHMS SIMULTANEOUSLY ON THE 2 DISPLAYS IN THE INSTRUMENT. SOME OF THE OTHER FEATURES INCLUDE, RUGGED FIRE RETARDED CASING; 600V AC/DC PROTECTION, FULLY AUTO RANGING, HIGH VOLTAGE FREQUENCY WITH AUTO-RANGING TRIGGER LEVELS, 30MS MAX HOLD TO CAPTURE PEAK CURRENT, DIMENSION 190 (L) X 63 (W) X 32 (H) MM, AND WEIGHT IS 187GMS APPROXIMATELY
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
