|
|
Electronic Equipment & Components
|
Suppliers Directory
|
FABROTECH
| | Address : |
J 231 ANSA INDL ESTATE SAKI VIHAR ROAD SAKINAKA |
| Telephone : |
22-8524820 |
| Fax : |
22-8354320 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
DIGITAL RPM INDICATORS - USEFUL FOR MEASURING SPEED OF ROTATING MACHINES IN DIFFERENT INDUSTRIES THESE CAN MEASURE SPEED AS LOW AS 1 PULSE PER MINUTE 1 RPM WITHOUT ANY TEETH WHEEL SPEED IS MEASURED WITH AN ACCURACY OF 0.05% DEPENDING ON THE MEASURING SPEED THE RESOLUTION OF DISPLAY IS ADJUSTED AUTOMATICALLY FOR LOWER SPEED A RESOLUTION OF 0.1 OR 0.01 RPM CAN BE PROVIDED AS OPTIONAL THE 4 DIGIT DISPLAY IS UPDATED AT SUITABLE INTERVALS SO AS TO DISPLAY SUDDEN CHANGE OF SPEED MAINTAINING STABLE DISPLAY IMPUT PULSE CAN BE F ROM PROXIMITY SWITCH INFRARED SENSOR VOLTAGE PULSE OR NO CONTACT OF A SWITCH POWER CONSUMPTION IS LESS THAN 5 W OPERATING SUPPLY VOLTAGE IS 230 V AC 10% 50 HZ IT IS HOUSED IN ENCLOSURE OF DIN SIZE 48 MM H * 110 MM D
|
|
FREQUENCY INDICATOR - FABROTECH MANUFACTURES DIGITAL LINE FREQUENCY INDICATOR USEFUL FOR MEASURING THE POWER SUPPLY FREQUENCY AT POWER STATIONS, ELECTRICITY BOARDS, POWER GENERATING SETS, ETC. ITS FREQUENCY IS MEASURED WITH AN ACCURACY OF 0.01 PER CENT AND DISPLAYED WITH A RESOLUTION OF 0.01 HZ. THE DISPLAY RESPONDS QUICKLY TO SUDDEN CHANGE IN LINE FREQUENCY IT COMES WITH AN A 4-DIGIT, 0.5"HEIGHT BRIGHT RED LED DISPLAY USED TO DISPLAY THE LINE FREQUENCY. HIGH ACCURACY AND QUICK RESPONSE ARE THE IMPORTANT FEATURES OF THIS LINE FREQUENCY INDICATOR AND CONSUMES POWER LESS THAN 5 WATT. OPERATING SUPPLY VOLTAGE IS 230 V AC (+)(-) 10%, 50 HZ AND IS HOUSED IN AN ENCLOSURE OF DIN SIZE 48(H) X 96(W) X 110(D) MM. IT IS ALSO AVAILABLE ARE 6-DIGIT EVENT COUNTER/TOTALISER, TIME TOTALISER AND 4-DIGIT RATE INDICATOR.
|
|
RATE/FREQUENCY/RPM INDICATOR, 4-DIGITAL - FABROTECH OFFERS A 4-DIGIT RATE/FREQUENCY/RPM INDICATOR WHICH CAN BE USED FOR MEASURING SPEED WITH A DISPLAY RANGE OF 0.001 TO 9999 UNITS DISPLAYED ON 4-DIGIT 0.56"HEIGHT BRIGHT RED LED DISPLAY AND CAN MEASURE SPEED AS LOW AS 1 PULSE PER MINUTE (1 RPM). THE SPEED IS MEASURED WITH AN ACCURACY OF 0.01% AND THE MEASURED SPEED CAN BE MULTIPLIED BY A FACTOR (FACTORY SET) FROM 0.001 TO 9999 FOR RATE DISPLAY. DEPENDING ON THE MULTIPLIER FACTOR AND MEASURING SPEED, THE RESOLUTION OF DISPLAY IS ADJUSTED AUTOMATICALLY AND ITS 4-DIGIT DISPLAY IS UPDATED AT SUITABLE INTERVALS, SO AS TO DISPLAY THE SUDDEN CHANGE OF SPEED MAINTAINING A STABLE DISPLAY. THE INPUT PULSE CAN RANGE FROM PROXIMITY SWITCH, INFRARED SENSOR, VOLTAGE PULSE OR NO-CONTACT OF A SWITCH WITH A POWER CONSUMPTION LESS THAN 5 W. OPERATING SUPPLY VOLTAGE IS 230 V AC ±10%, 50 HZ. THE INSTRUMENT IS HOUSED IN AN ENCLOSURE OF DIN SIZE 48 (H) X 96 (W) X 110 (D) MM.
|
|
EVENT COUNTER/TOTALISER, DIGITAL - FABROTECH OFFERS A DIGITAL EVENT COUNTER/TOTALISER USEFUL AS PULSE COUNTER IN DIFFERENT PROCESS AND INDUSTRIES. BY SETTING A MULTIPLYING FACTOR IT CAN BE USED TO DISPLAY THE LINEAR MEASUREMENT SUCH AS TOTAL LENGTH IN METRES OR CM AND CAN BE FROM A PROXIMITY SWITCH, INFRARED SENSOR, VOLTAGE PULSE OR NORMALLY OPEN (NO) CONTACT OF A SWITCH AND CAN BE RESET BY THE FRONT SWITCH OR FROM THE REAR TERMINAL. 6-DIGIT 0.56 HEIGHT BRIGHT RED LEDS DISPLAY THE COUNT AND AN OPTIONAL 6-DIGIT COUNTER CAN BE USED AS LOW COST, COMPACT 11-DIGIT COUNTER. IN CASE OF POWER FAILURE, THE DISPLAY COUNT IS RETAINED IN MEMORY WITHOUT ANY BATTERY (OPTIONAL WITH A POWER CONSUMPTION OF LESS THAN 5 WATTS. OPERATING SUPPLY VOLTAGE IS 230 V AC ±10%, 50 HZ AND COUNTER IS HOUSED IN AN ENCLOSURE OF DIN SIZE 48 (H) X 96 (W) X 110 (D) MM.
|
|
DIGITAL PRESET COUNTER - FABROTECH INTRODUCES DIGITAL PRESENT COUNTER WHICH COMES WITH THE SPECIFICATIONS, LIKE INPUT-PROXIMITY SWITCH, PHOTO SENSOR, VOLTAGE PULSE, N/O CONTACT; INPUT MULTIPLIER-0.00001 TO 999999 (FACTORY SET); MEMORRY-NON-VOLTILE MEMORY; RESET-FRONT SWITCH AND BACK TERMINAL OPEN, DISABLE-BACK TERMINAL HIGH; COUNT DIRECTION-UP OR DOWN COUNTINGL COUNT SETTING-2 TO 6 THUMB WHEEL SWITCHES, SETTING RESOLUTION-1 OR 2 DECIMAL PLACE; DISPLAY-2 TO 6 DITIT, 0.56" LED DISPLAY; OUTPUT CONTACT-2 NO/NC RATED @5A 230 V AC; OUTPUT MODE-DELAYED ON, DELAYED ORR; SUPPLY VOLTAGE-230 V AC 10% 50 HZ; POWER-5W MAX; DIMENSION-96 (H)*96(W)*130 (D) MM; PANEL CUT-OUT-92 * 92 MM; AND WEIGHT-600 GM APPROX
|
|
DIGITAL TIMER (ON/OFF & CYCLIC) - ON/OFF AND CYCLIC DIGITAL TIMERS OFFERED BY FABROTECH ARE AVAILABLE IN THE FOLLOWING SPECIFICATIONS; TIME RANGE - 0.1 SEC TO 999999 HRS; RESOLUTION - 0.1 OR 1 (SEC OR MN OR HR); ACCURACY - 0.02%; MEMORY - OPTIONAL NON-VOLATILE MEMORY; RESET - FRONT SWITCH AND BACK TERMINAL; COUNT CONTROL - ENABLE - BACK TERMINAL OPEN, DISABLE - BACK TERMINAL HIGH; COUNT DIRECTION - UP OR DOWN COUNTING; TIME SETTING - 2 TO 6 THUMB WHEEL SWITCHES; DISPLAY - 2 TO 6 DIGIT, 0.56" LED DISPLAY; OUTPUT CONTACT - 2 NO/NC RATED @ 5 A 230 V AC; OUTPUT MODE - DELAYED ON, DELAYED OFF AND CYCLIC; SUPPLY VOLTAGE - 230 V AC 10% 50 HZ; POWER - 5 W MAX; DIMENSION - 96 (H) X 96 (W) X 130 (D) MM; PANEL CUT-OUT - 92 X 92 MM.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
