|
|
Electronic Equipment & Components
|
Suppliers Directory
|
PRODUCTIVE TECHNOLOGIES PVT LTD
| | Address : |
C-56 JHANDEWALAN FLATTED COMPLEX |
| Telephone : |
011-75367083516122 |
| Fax : |
91-11-7536824 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
AUTOMOTIVE TEST SYSTEMS - AUTOMOTIVE TEST SYSTEMS INCLUDES RANGE OF ELECTRO MECHANICAL RESONANCE HIGH FREQUENCY FATIQUE TESTERS AS WELL AS CLOSED LOOP SERVO HYDRAULIC UTMS ARE SUITABLE FOR TESTING OF AUTOMOTIVE COMPONENTS, SUB SYSTEMS AND STRUCTURES APART FROM ROUTINE MATERIAL TESTING APPLICATIONS INCLUDING TENSILE, FRACTURE TOUGHNESS, LOW AND HIGH CYCLE FATIQUE, IMPACT, ROTARY BEND, FATIQUE, CREEP ETC AT ROOM, SUB ZERO AND ELEVATED TEMPERATURE CONDITIONS.
|
|
MICROPROCESSOR-BASED HARD BEARING DYNAMIC BALANCING MACHINE - PRODUCTIVE TECHNOLOGIES PVT LTD MAKES A RANGE OF HORIZONTAL AND VERTICAL MICROPROCESSOR-BASED HARD BEARING DYNAMIC BALANCING MACHINES. SINGLE AND TWO-PLANE MACHINES ARE AVAILABLE FOR MULTIFARIOUS ROTOR FROM 0.1 KG TO 10,000 KG FOR A VARIETY OF INDUSTRIAL ROTATING COMPONENTS. THE MACHINES FIND USE IN INDUSTRIES SUCH AS AUTOMOBILE, AIR-CONDITIONING, POWER GENERATION, TEXTILE, RAILWAYS, AERONAUTICS, CHEMICAL, FERTILIZERS, DOMESTIC APPLIANCES, AND OTHER PROCESS PLANTS. USING A DIGITAL SYSTEM DEVELOPED BY THE COMPANY, THE ENTIRE SIGNAL PROCESSING IS DONE DIGITALLY USING HIGH SPEED ADCS AND LATEST VLSI TECHNOLOGY. THE UNBALANCE MEASURING SYSTEM ELECTRONICS DESIGNED TO ENSURE A HIGH DEGREE OF RELIABILITY IS COUPLED WITH THE USE OF SWITCHED CAPACITANCE FILTERS FOR PRECISION. THE ENTIRE SYSTEM HAS NO MOVING PARTS WHICH COULD CAUSE A FATIGUE FAILURE, THUS ENHANCING HARDWARE RELIABILITY. A VERSATILE SYSTEM SOFTWARE MAKES BALANCING EXTREMELY SIMPLE FOR THE OPERATOR. EFFICIENT FAULT DIAGNOSTICS ARE AVAILABLE TO PROVIDE INSTANTANEOUS DISPLAY OF ERRORS FOR PROMPT RECTIFICATION. SOME SPECIAL FACILITIES SUCH AS DISPLAY OF ROTOR RPM PRIOR TO DISPLAY OF UNBALANCE VALUES AND NO SUPPRESSION OF UNBALANCE OR ZERO ERROR PROBLEMS ALLOW EVEN UNTRAINED AND UNSKILLED OPERATORS TO USE THE MACHINE WITH MINIMAL EXPOSURE. IF A ROTOR IS BALANCED WITHIN USER-SPECIFIED TOLERANCE LEVELS THE MACHINE DISPLAYS BALANCED TO INDICATE TO THE OPERATOR THAT NO FURTHER CORRECTION IS REQUIRED. SPECIAL SOFTWARE ROUTINES FOR AUTOMATIC COMPENSATION OF ADAPTER ECCENTRICITY AND REMOUNT ERRORS COME AS STANDARD FACILITY.
|
|
HARD BEARING DYNAMIC BALANCING MACHINE - PRODUCTIVE TECHNOLOGIES PVT LTD PRESENTS A RANGE OF HORIZONTAL AND VERTICAL RFIICROPROCESSOR-BASED HARD BEARING DYNAMIC BALANCING MACHINES. SINGLE- AND TWO-PLANE MACHINES ARE AVAILABLE FOR MULTIFARIOUS ROTOR BALANCING FROM 0. 1 KG TO 10,000 KG FOR A VARIETY OF INDUSTRIAL ROTATING COMPONENTS. THESE MACHINES FIND USE IN INDUSTRIES LIKE AUTOMOBILE, AIR-CONDITIONING, POWER GENERATION, TEXTILE, RAILWAYS, AERONAUTICS, CHEMICAL, FERTILIZERS, DOMESTIC APPLIANCE, AND OTHER PROCESS PLANTS. USING A TRUE DIGITAL SYSTEM DEVELOPED BY THE COMPANY, THE ENTIRE SIGNAL PROCESSING IS DONE DIGITALLY USING HIGH SPEED ADCS AND LATEST VLSI TECHNOLOGY. THE MICROPROCESSOR ASSISTED BALANCING INSTRUMENTATION (MABI) ELECTRONICS IS DESIGNED TO ENSURE A HIGH DEGREE OF RELIABILITY COUPLED WITH THE USE OF SWITCHED CAPACITANCE FILTERS FOR PRECISION. THE ENTIRE SYSTEM HAS NO MOVING PARTS WHICH COULD CAUSE A FATIGUE FAILURE, THUS ENHANCING HARDWARE RELIABILITY. A VERSATILE SYSTEM SOFTWARE RIIAKES BALANCING EXTREMELY SIMPLE FOR THE OPERATOR. THE PRINTER CAN ALSO BE INTERFACED WITH ELECTRONIC UNIT TO GET HARD COPY PRINTOUTS OF BALANCING RESULTS. EFFICIENT FAULT DIAGNOSTICS ARE AVAILABLE TO PROVIDE INSTANTANEOUS DISPLAY OF ERRORS FOR PROMPT RECTIFICATION. SOME SPECIAL FACILITIES SUCH AS DISPLAY OF ROTOR RPM PRIOR TO DISPLAY OF UNBALANCE VALUES AND NO SUPPRESSION OF UNBALANCE OR ZERO ERROR PROBLEMS ALLOW EVEN UNTRAINED AND UNSKILLED OPERATORS TO USE THE MACHINE WITH MINIMAL EXPOSURE. IF A ROTOR IS BALANCED WITHIN USER-SPECIFLED TOLERANCE LEVELS THE MACHINE DISPLAYS BALANCED TO INDICATE TO THE OPERATOR THAT NO FURTHER CORRECTION IS REQUIRED. SPECIAL SOFTWARE ROUTINES FOR AUTOMATIC COMPENSATION OF ADAPTER ECCENTRICITY AND REMOUNT ERRORS COME AS STANDARD FACILITY.
|
|
HARDNESS TESTER - PRODUCTIVE TECHNOLOGIES PRESENTS DIRECT READING DIGITAL BENCH-TOP ROCKWELL AND VICKERS HARDNESS TESTERS WHICH ARE BOTH ACCURATE AND RELIABLE. THESE HARDNESS TESTERS CAN TEST ACTUAL COMPONENTS AS WELL AS PREPARED SPECIMENS. THIS UNIQUE FACILITY CAN OFTEN AVOID THE NEED FOR DESTRUCTIVE SAMPLED PREPARATION FOR HARDNESS TESTING. DIFFERENT MODELS ARE AVAILABLE WITH OPTIONS LIKE LCD DISPLAY TO SOPHISTICATED TOUCH SCREEN MICROPROCESSOR CONTROL AND MOTORIZED LEAD SCREW, ETC. MOST OF THE HIGHER END MACHINES OFFER AUTOMATIC SCALE CONVERSION BETWEEN ROCKWELL, VICKERS, BRINELL, KNOOP AND UTS, ETC. THE COMPANY ALSO OFFERS PORTABLE DIGITAL HARDNESS TESTERS THAT MEASURE HARDNESS IN LEEB SCALE USING THE VELOCITY METHOD AND PROVIDE CONVERSION TO MOST COMMON SCALES. THESE CAN BE USED TO TEST ALUMINIUM, BRASS, BRONZE AND COPPER TOO. THEY HAVE PROVEN TO BE EXTREMELY RELIABLE AND FREE FROM THE HANDICAPS, TYPICALLY USED ON SPECIMENS OVER 3-KG WEIGHT.
|
|
MATERIAL TESTING SYSTEM - THE TMI GROUP OF COMPANIES PRESENTS INSTRUMENTS TO MEASURE THE PHYSICAL PROPERTIES OF MATERIALS INCLUDING PULP AND PAPER, FILM, FOIL, INK, COATINGS, NONWOVENS, PLASTIC, RUBBER, TEXTILE, ADHESIVES, CERAMIC, METAL AND CORRUGATED. INSTRUMENTS ARE AVAILABLE TO MEASURE MORE THAN 50 PROPERTIES INCLUDING ADHESION, ABRASION, FRICTION, COMPRESSION, TENSILE STRENGTH, IMPACT, INTERNAL BOND, SOFTNESS AND THICKNESS.TESTLINK SOFTWARE IS AVAILABLE FOR THE ACQUISITION, DISPLAY, ANALYSIS AND STORAGE OF TEST DATA. PREVENTATIVE MAINTENANCE AND CALIBRATION SERVICE IS AVAILABLE WORLDWIDE TO PROVIDE CALIBRATION OF TEST EQUIPMENT AT THE CUSTOMERS SITE TO AVOID COSTLY DOWNTIME. DEDICATED SALES STAFF AND SALES AGENTS IN MORE THAN 50 COUNTRIES PROVIDE LOCAL, PERSONALIZED ATTENTION.WE WELCOME THE OPPORTUNITY TO LEARN ABOUT YOUR APPLICATIONS AND SHOW YOU HOW TO PROFIT THROUGH TESTING. THE TMI GROUP OF COMPANIES INCLUDES: 1. TESTING MACHINES INC; NEW YORK AN IMPORTER OF MEASUREMENT INSTRUMENTS FOR THE PAPER INDUSTRY SINCE 1917, TESTING MACHINES INC. IS A LEADING MANUFACTURER OF COMPUTERIZED INSTRUMENTS FOR A WIDE RANGE OF INDUSTRIES. THIS FACILITY IS IN THE CORPORATE OFFICE FOR THE TMI GROUP OF COMPANIES AND HAS BEEN ISO ACCREDITED SINCE 1992. 2. MESSMER INSTRUMENTS LTD, UK. 3. BUCHEL VAN DER KORPUT, THE NETHERLANDS. 4. ADAMEL LHOMARGY, FRANCE. 5. TMI CANADA, CANADA.
|
|
SPIN TESTING SYSTEM - SPIN TESTING SYSTEMS DESIGN YOUR OWN SPIN TEST FACILITY:THE INFORMATION WILL ALLOW US TO DEFINE AND QUOTE A FACILITY BEST SUITED TO YOUR REQUIREMENT. TEST ARTICLES: 1. GENERAL DESCRIPTION E.G. TURBINE, IMPELLERS, FLY WHEELS, JET ENGINES, ROTORS ETC... 2. MAXIMUM DIAMETER. 3. MAXIMUM AXIAL HEIGHT. 4. MAXIMUM WEIGHT 5. TEST ARTICLE WEIGHT CORRESPONDING TO THE MAXIMUM SPEED REQUIREMENT TEST TYPE: 1. PRODUCTION OVER SPEED. 2. BURST. 3. R & D- LOW CYCLE FATIGUE. 4. R & D- STAIN FATIGUE/HIGH CYCLE FATIGUE. TEST REQUIREMENTS: 1. MAXIMUM TEST SPEED. 2. TEST SPEED REQUIREMENT FOR THE HEAVIEST TEST ARTICLE. 3. LOWEST TEST ARTICLE TEMPERATURE. 4. HIGHEST TEST ARTICLE TEMPERATURE. 5. VACUUM LEVEL. 6. ANTICIPATED PRODUCTION THROUGHOUT. DOCUMENTATION REQUIREMENTS: 1. HIGH SPEED. 2. STRIP CHART RECORDING. 3. DIGITAL SPEED PRINTING. 4. COMPUTERISED DATA ACQUISITION.
|
|
TENSILE TESTING MACHINES, UNIVERSAL - MECHTRIC 71 - PROTEQ PRESENTS A RANGE OF SCREW DRIVEN MICROPROCESSOR-BASED, TENSILE TESTING MACHINES, MANUFACTURED BY MECHTRIC ENGINEERING LTD, UK. THESE MACHINES, RELIABLE, ACCURATE, USER-FRIENDLY AND BACKED BY GOOD AFTER SALES SERVICE. THEY OFFER THE LATEST PRECISON, DIGITAL TECHNOLOGY AT REASONABLE PRICES, TO CARRY OUT A VARIETY OF TENSILE, COMPRESSION, BEND AND SLOW CYCLIC TESTS. THE MECHTRIC 7150 SERIES MACHINES ARE MICROPROCESSOR CONTROLLED. THEY ALSO ALLOW, OPTIONALLY, A PC INTERFACE THROUGH WINDOWS DRIVEN SOFTWARE. HOWEVER, THE MACHINE CAN BE CONTROLLED ENTIRELY FROM THE CONSOLE FOR THOSE WHO DO NOT WISH TO DRIVE THE MACHINE THROUGH A PC. THE CONSOLE ALSO FEATURES A SINGLE BUTTON CONTROLLED PRINTOUT FACILITY OF THE TEST RESULTS AND GRAPHS AS A STANDARD. THE MACHINES ARE SUPPLIED DULY CALIBRATED TO AN ACCURACY OF 1% AS PER BS 1610 GRADE 1.0, WHICH IS THE LEADING INTERNATIONAL STANDARD AND REPRESENTS HIGHEST ACCURACY. IT IS ALSO THE EQUIVALENT OF ASTM STANDARD. OPTIONAL THIRD PARTY CALIBRATION CERTIFICATE FROM NAMAS, UK (EQUIVALENT OF NPL IN INDIA) IS ALSO AVAILABLE. THE RESOLUTION OF THE SYSTEM IS 0.004% OF FULL SCALE AND TESTS CAN BE DONE BELOW THE CROSSHEAD AT UP TO 1,000 MM/MIN SPEEDS. VARIOUS TOOLING OPTIONS FROM A LARGE COMPLEMENT OF TOOLS AND ACCESSORIES ARE AVAILABLE.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
