|
|
Electronic Equipment & Components
|
Suppliers Directory
|
WAGO & CONTROLS (INDIA) LTD
| | Address : |
C-27 SECTOR-58, NOIDA PHASE LLL GAUTAM BUDH NAGAR, |
| Telephone : |
0120-2580409/102580873 |
| Fax : |
91-120-2580081 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
FIREWIRE COUPLER - A NEW FIREWIRE COUPLER THE WAGO B I/O B SYSTEM 750 OFFERS FAST REAL TIME COMMUNICATION AND AUTOMATION SOLUTIONS WITH ETHERNET, IT IS TAKING THE WAY-I/0 SYSTEM 750 AS BASE THE COMPANY OFFER MODULAR I/O SYSTEM FOR THE WIRE O OR IEEE-1394 FIELDBUS THE COUPLER READS THE SIGNALS COMMING FROM THE DIGITAL AND ANALOGUE INPUT AD OUTPUR MODULES AND TRANSMITS THEM IN THE FROM OF ASYNCHRONOUS OR ISOCHRONOUS DATA PACKAGES. HAVING 400MBIT/S IT PROCESS BANDWIDTH THAT IS UP TO 30 TIMES LARGER THAN USB, FOR INDUSTRIAL USE THIS IS REAL-TIME CAPABILITY WITH SHORT CYCLE TIMES THIS SYNCHRONISATION MECHANISMS ALLOWS FOR DETERMINISTIC BEHAVIOUR WITH EXTERMELY SHORT JITTER TIMES OF UNDER 1 US WHICH IS ESPECIALLY IMPORTANT IN POWER TRANSMISSION ENGINEERING AND MEASUREMENT APPLICATIONS, THE PC CONNECTION IS VERY ECONOMICAL AS UP TO DATE COMPUTER ARE EQYIPPED WITH FIRE WIRE INTERFACES AS A STANDARD, COMMUNICATION VIA TCP/IP IS NOT ALSO POSSIBLE (IP OVER IEEE 1394) SO IEEE 1394 DOES NOT COMPETE WITH ETHERNET BUT IS SUPPLEMENT IN APPLICATIONS THAT REQUIRE REAL TIME CAPABILITY AND HIGH DATA TRANSMISION RATES.
|
|
MULTI CHANNEL INPUT MODULE - THE WAGO BI/OB SYSTEM 750 EQUIPPED WITH ADDITIONAL COUPLERS BUT ARE SIMPLY INTERGRATED INTO THE NEAREST FIELDBUS NODE. WHERE AS IN A NORMAL APPLICATION, THE SHARE OF SAFE INPUTS AND OLUTPUTS IS 10%-20% OF THE TOTAL AND IS DISTRIBUTED ACROSS THE AUTOMATION FIELD. THE PROFI SAFE COMPLIAN TCAN BE CONFIGURED ACCORDING TO THE DEFINED PROFI SAFE PROFIELS, THESE CAN BE USED FOR SAFELY APPLICATIONS FROM CATEGORY 2 TO CATEGORY 4 IN ACCORDANCE WITH EN 954-1, SIL3 OR IEC 61508 IT IS AND 8-CHANNEL INPUT MODULE WITH SAFETY FUNCTION FOR DIRECT CONNECTION OF SENSORS.
|
|
TERMINAL BLOCK LIKE COUPLER - THE RAIL-MOUNTED TERMINAL BLOCKS WITH COUPLER FUNCTION CAN BE FIXED IN A DIN 35 CARRIER RAIL AND COMMONED OR MARKET LIKE NORMAL TERMINAL BLOCKS, HOWEVER, THEY RELAYS OR OPTOCOUPLERS IN A WIDTH OF ONLY 6 MM. JUMPER CONTACT POSITIONS ON BOTH THE CONTROL AND THE LOAD SIDE OFFER FAST LOOPING THROUGH OF COMMON INPUT OR OUTPUT POTENTIALS. IN THIS SYSTEM 19 RELAY TERMINAL BLOCKS AND 18 OPTOCOUPLER TERMINAL BLOCKS ARE AVAILABLE. THERE ARE MANY RANGE AVAILABLE WITH 7 DIFFERENT OPTOCOUPLERS FOR INPUTS VOLTAGES FROM 5 V TO 230 V AND 5 V OR 24 V OUTPUTS, LOW-SIDE OR HIGH-SIDE SWITCHING.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
